A roof leak may come from shingles, flashing, pipe boots, vents, valleys, skylights, chimneys, or roof edge details. The water stain inside your home is not always directly below the source of the leak.

Missing shingles expose the roof system to water. Even a small exposed area can lead to leaks, decking damage, and interior staining if ignored.

Pipe boots are one of the most common leak sources on asphalt shingle roofs. The rubber gasket can crack, split, or deteriorate over time.

Flashing protects vulnerable areas around chimneys, walls, valleys, vents, and transitions. Damaged or poorly installed flashing can cause repeat leaks.

Chimney areas are common leak points because they require proper step flashing, counter flashing, sealant details, and water diversion.

Roof vents can leak when flashing fails, shingles loosen around the vent, fasteners back out, or the vent itself becomes damaged.

Clogged, loose, or poorly pitched gutters can force water back toward roof edges, fascia, soffit, and siding.

Damaged soffit and fascia can expose roof edges to moisture, pests, ventilation problems, and rot.

Loose, cracked, or damaged siding can allow water behind the exterior wall system and should be repaired before the problem spreads.

If your roof is actively leaking, missing shingles, or damaged after wind or storms, fast repair can help prevent interior water damage.

We inspect the leak source, not just the visible stain. Common leak sources include flashing, pipe boots, vents, valleys, chimneys, skylights, and missing shingles.

We replace or secure damaged shingles when the surrounding roof is still in repairable condition.

We replace failed pipe boots and inspect surrounding shingles and decking for water damage.

We repair or replace flashing details around chimneys to help stop recurring leaks.

We repair or replace damaged roof vents, loose fasteners, cracked vent flashing, and shingles around roof penetrations.

Valleys handle heavy water flow. Damaged shingles, poor flashing, or debris buildup in valleys can create leaks.

Ridge caps can crack, loosen, or blow off in high winds. We repair damaged ridge areas and check ventilation details.

Exposed or backed-out nails can create small water entry points. We identify and seal or repair problem areas properly.

Wind, hail, branches, and debris can cause localized roof damage that may be repairable without full replacement.

Ice dams can force water under shingles and damage roof edges, gutters, soffit, fascia, and interior walls.

We repair loose, leaking, damaged, or poorly draining gutters that may affect roof edges and foundation drainage.

Downspouts help move water away from the home. Damaged or disconnected downspouts can cause drainage and foundation problems.

Soffit damage can affect ventilation, roof edge protection, and pest resistance.

Fascia supports gutters and protects roof edges. Rotted or damaged fascia should be repaired before gutters fail.

We repair damaged siding from wind, hail, impact, or water exposure.

Roof edges are vulnerable to water, ice, gutter issues, and fascia damage. We inspect and repair the full edge detail.

Exterior trim can loosen, rot, or separate from the home, allowing moisture into the exterior system.

We handle smaller storm-related repairs to roofing, siding, gutters, fascia, and soffit.

Rubber pipe boot gaskets crack over time and often leak around plumbing vent pipes.

Flashing problems around chimneys, walls, skylights, and valleys are common sources of roof leaks.

Missing shingles expose underlayment and decking to water.

Fasteners can back out and create small holes where water can enter.

Plastic or metal roof vents can crack, loosen, or leak around the flashing.

Water backing up from clogged gutters can damage fascia, soffit, roof edges, and siding.

Ice buildup along roof edges can force water under shingles.

Old caulk or sealant around roof penetrations can dry out, crack, and fail.

Poor attic ventilation can contribute to moisture, heat buildup, ice dam issues, and shingle wear.

As shingles age, they lose flexibility, granules, and sealing strength.

Call or request a service visit for your roof or exterior repair issue.

We inspect the visible issue and surrounding areas that may be contributing to the problem.

You get a plain-English explanation of the issue, likely cause, and repair options.

We explain whether a repair is reasonable or whether a larger replacement should be considered.

Once approved, we complete the repair using proper materials and installation practices.

We clean the work area and can document the completed repair when appropriate.

Typical examples: a few shingles, nail pop repair, small pipe boot issue, minor sealant issue.

Typical examples: chimney flashing, multiple shingles, valley leak, roof vent repair, localized storm damage.

Typical examples: multiple leak areas, roof edge rot, decking damage, major flashing failure, combined roof/gutter/fascia issue.

We do not treat every problem like it automatically needs a full roof replacement.

We are based in Lombard and serve DuPage County, Cook County, and nearby suburbs.

We can inspect roofing, gutters, siding, soffit, fascia, and roof edge details together.

We explain what failed, why it matters, and what repair options make sense.

Roman Roofing LLC is licensed and insured for roofing work in Illinois.

Have a roof or exterior repair question we haven’t covered? Schedule an inspection and get a clear answer for your home.